Advertisement
Getting Started:
There's a lot you can do with your new device, so here's a quick glance of some basic items to get you
started.
Buttons and Icons
1. Attaching LTE Cellular Antennas
The R500-PLTE router includes two LTE cellular (paddle) antennas. Attach the antennas to the ports
marked MAIN and DIV, as shown below.
•
Hold the antenna straight and twist the base to thread onto the connector.
Tighten with fingers only. Do not over-tighten.
•
Once the router is mounted and powered on, angle the antennas for optimal signal
•
reception.
Connect2Learn Cradlepoint
Cradlepoint R500
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cradlepoint R500
Summary of Contents for Cradlepoint R500
- Page 1 Buttons and Icons 1. Attaching LTE Cellular Antennas The R500-PLTE router includes two LTE cellular (paddle) antennas. Attach the antennas to the ports marked MAIN and DIV, as shown below. • Hold the antenna straight and twist the base to thread onto the connector.
- Page 2 2. Attach the Wi-Fi antennas The R500-PLTE router includes two Wi-Fi (stick) antennas. Attach the antennas to the ports marked 2.4/5GHz, as shown below. • Hold the antenna straight and twist the base to thread onto the connector. Tighten with fingers only. Do not over-tighten.
Need help?
Do you have a question about the R500 and is the answer not in the manual?
Questions and answers