Cradlepoint R1900 Series Quick Start Manual
Hide thumbs
Also See for R1900 Series:
- Installation manual (15 pages) ,
- Installation manual (15 pages)
Table of Contents
Advertisement
Quick Links
3/27/24, 12:54 PM
Home (/s/)
R1900 Series Router Quick Start Guide
Jan 26, 2022
Knowledge
•
Content
R1900 Series Router Quick Start Guide
Introduction
This document provides a brief overview of the R1900 Series router, discusses what's inside the box, and provides basic setup and install instructions for the
router.
If you find information in this guide that is incorrect, misleading, or incomplete, we would appreciate your comments and suggestions.
NOTE: The Verify app includes many of the same instructions with an alternate order. This document supports the Verify app instructions. Use the Navigation
section below to locate the topics most applicable to troubleshooting your setup issues. For additional setup support, contact a professional installer or refer
to our Contact Us (https://cradlepoint.com/about-us/contact-us/) page.
Intended Audience
This article is intended for professional networking hardware installers. It provides basic knowledge and should be used only as a reference guide for
installing the R1900 Series router. Due to the unique nature of each installation, potential for RF exposure, and enhanced separation requirements,
customers must have a professional install their 5G hardware. This document is a reference guide and is intended only to provide best practices.
Refer to the Cradlepoint Product Disclaimer and Limitation of Liability section for further information.
Navigation
Use the following links to quickly navigate through the document.
STEP 1: Check box for contents.
STEP 2: Remove the SIM door.
STEP 3: Insert an activated 4FF-sized SIM into the router.
STEP 4: Reinstall the SIM door.
STEP 5 (OPTIONAL): Connect to an RX30 managed accessory.
STEP 6: Attach the antennas.
STEP 7: Mount the router.
https://customer.cradlepoint.com/s/article/R1900-Getting-Started?t=1711558419715
TECHNICAL SUPPORT (/s/contactsupport)
Search Technical Documentation
R1900 Series Router Quick Start Guide
Caption
TRAINING (/s/cpu)
FORUMS (/s/forums)
DEVELOPERS (/s/developers)
1/8
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cradlepoint R1900 Series
Summary of Contents for Cradlepoint R1900 Series
- Page 1 R1900 Series Router Quick Start Guide Introduction This document provides a brief overview of the R1900 Series router, discusses what’s inside the box, and provides basic setup and install instructions for the router. If you find information in this guide that is incorrect, misleading, or incomplete, we would appreciate your comments and suggestions.
- Page 2 Location Considerations The R1900 is built for installation in a variety of environments. Cradlepoint recommends having a professional install the R1900 router to ensure proper signal reception and usage. The following are best practices for determining the location for the installation: Ensure that the mounting surface is flat and clear of any obstructions or objects that may interfere with the antennas, signal reception, or cables.
- Page 3 [1] Safety, Warranty, and Regulatory guide Accessories To optimize the R1900 series router for Wireless WAN or with failover configuration, you will need at least one activated 4FF-sized SIM card, with an active cellular data plan. Additional accessories to enhance your router capabilities include, but are not limited to:...
- Page 4 STEP 7: Mount the router. The R1900 series router may be mounted in a number of ways and should be completed by a professional installer. Refer to the following for best practices: Mark the desired mounting location on the ceiling, wall, kiosk, or vehicle using a pen or marker.
- Page 5 STEP 10: Activate the router through NetCloud Manager. Activate your R1900 series router through NetCloud Manager (NCM). Your router is packaged with NetCloud services and requires that you log into your NetCloud account to activate. Refer to Getting Started with NetCloud Manager (https://customer.cradlepoint.com/s/article/Getting-Started-with-NetCloud- Manager) for more information.
- Page 6 3/27/24, 12:54 PM R1900 Series Router Quick Start Guide No Light = Not receiving power. Check the power switch and source connection. Green = Powered ON. Yellow = Attention. Log into NCM and use the Remote Connect menu to access the router’s NCOS to manage any alert.
- Page 7 Installer Responsibility Cradlepoint hereby disclaims any liability for failure of the installer to install the hardware properly and for any other acts and omissions of the installer. By using this Professional Installation Guide, you agree to indemnify and hold Cradlepoint harmless from and against any and all, liabilities, losses, damages, costs and expenses (including without limitation attorneys’...
- Page 8 Limitation of Liability TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL CRADLEPOINT BE LIABLE TO YOU OR TO ANYONE CLAIMING THROUGH OR UNDER YOU FOR ANY LOST PROFITS, EQUIPMENT DOWNTIME, OR LOSS OF DATA OR BUSINESS OPPORTUNITY, OR FOR ANY...
Need help?
Do you have a question about the R1900 Series and is the answer not in the manual?
Questions and answers