ICP DAS USA MAVIS IM-30 User Manual page 92

IMC_StrobeTimeBase_ReadConfiguration
Syntax:
Visual C++ 6.0 / Boland C++ Builder 6.0:
short IMC_StrobeTimeBase_ReadConfiguration (HANDLE Camera_Handle, unsigned
long* pDurat ionTime, unsigned long* pDelayTime);
Visual Basic 6.0
IMC_StrobeTimeBase_ReadConfiguration (ByVal Camera_Handle As Long, ByRef
pDurationTime As In
C#.NET 2003
Mavis.IMC_StrobeTimeBase_ReadConfiguration (IntPtr Camera_Handle, out Int3
pD urationTime, out Int32 pDelayTime);
Description:
This function reads the current setting of Strobe Time Base. The camera needs be
initialized with IMC_Camera_Init().
Parameters:
Camera_Handle
pDurat ionTime
p DelayTime
Return:
ERROR_SUCCESSFUL
ERROR_CAMERA_CREATE
ERROR_DEVICE_UNINIT
ERROR_INVALID_CAMERA
ERROR_SOURCE_NOT_SUPPORT
teger, ByRef pDelayTime As Integer) As Integer
The handle for MAVIS camera. Use the handle gotten from the
'pHandle' parameter of IMC_Camera_Init().
The Duration Time of Strobe Time Base and allows value from 1
~85. By default, the Value is setting on 1.
The Delay Time of Strobe Time Base and allows value from 1
~85. By default, the Value is setting on 1.
- 92 -
Successfully
The Camer a_Handle is NULL.
The specific camera ha
initialized.
The handle is invalid
The source signal is not supported by that
specific output port.
s not been
.
2