Table of Contents
Advertisement
IMC_StrobeContr
ol_ReadConfiguration
Sy
ntax:
Visual C+
+ 6.0 / Boland C++ Builder 6.0:
short IMC_StrobeControl_ReadConfiguration (HANDLE Camera_Hand
short sStrobeIndex, bool*
long* pDuration);
Visual Basic 6.0
IMC_StrobeControl_Rea
sStrobeIndex As Integer, ByRef pOnOff A
pDelay As Long, ByRef pD
C#.NET 2003
Mavis.IMC_StrobeControl_ReadConfigur
sStrobeIndex, ref bool pOnOff, ref bool pPolarity, ref Int32 pDelay, ref Int32 pDuration);
Description:
This function reads the current setting of specific Strobe Control. This function is
workable only for the Output Ports that are configured to STROBE_SIGNAL. The
camera needs be initialized with IMC_Camera_Init().
Parameters:
Camera_Handle
sStrobeIndex
pOnOff
pPolarity
pDelay
pDuration
pOnOff, boo
dConfiguration
uration As Lo
The handle for MAVIS camera. Use the handle gotten from the
'pHandle' parameter of IMC_Camera_Init().
The register index of Strobe Control and allows value from 0 ~3.
Enable or Disable strobe function. The value can be TRUE for
enable strobe or FALSE for disable strobe.
The signal pulse setting for active Strobe Control and pPolarity
can be one of below settings.
STROBE_CONTROL_LOWACTIVE
STROBE_CONTROL_HIGHACTIVE
By
default,
the
STROBE_CONTROL_HIGHACTIVE.
The delay time of Strobe and the Delay Value range from 0 to
4095. By default, the delay time is setting on 0.
The Duration Time of Strobe and the Strobe Duration range from
0 to 4095. By default, the duration is setting on 0.
- 89 -
l* pPolarity,unsigned long* pDel
(ByVal Camera_Handle As Long
s Boolean,
ByRef pPolarity As Boolean, ByRef
ng) As Integer
ation
(IntPtr
polarity
of
le, unsigned
ay, unsigned
, ByVal
Ca
mera_Handle,
Strobe
Control
Int32
is
Advertisement
Table of Contents
