Mirror Image - ICP DAS USA MAVIS IM-30 User Manual

1.4.3 Mirror Image

The mirror image feature is only available in the MAVIS IM-100 camera. When
you enable mirror image mode, the camera will reflect the image's vertical axis,
before data is transmitted out of the camera.
In factory mode, the mirror image is disabled and the order of transmission for
the pixels in each line is pixel 1, pixel 2, pixel 3, to 640. When mirror image mode
is enabled, the order of transmission for each line is pixel 640, pixel 639, pixel
638, to pixel 1.
If you are using the AOI mode (area of interest) in conjunction with
mirror image mode, the apparent location of your AOI may change.
You may need to adjust the location and size of the AOI.
Figure 1-3: Mirror Imaging
- 7 -