ICP DAS USA MAVIS IM-30 User Manual page 45

5.2.2 Feature Setting of Motion Module
The Motion Module now supported ET-M8194H and PISO-PS400, and each time
user only can choose one product model for motion control feature setting and
single axis operation.
EzVIEW_Fly utility required ET-M8194H or PISO-PS400 for hardware
trigger pulse operation. For hardware installation, please follow the
description of ET_8194H_QuickStart or PISO-PS400_Getting_Started
for operation correctly.
Main Feature Setting of Motion Module
Regarding the parameters meaning, please refer the ET_8194H_QuickStart or
PISO-PS400_Getting_Started for detail information.
Area Functionality
A Motion Controller Selection
Output Pulse Mode
B
ET-M8194H、PISO-PS400
CCW、PULSE DIR
- 45 -
Parameters