IMC_StrobeTimeBase_SetDurationTime
Syntax:
Visual C++ 6.0 / Boland C
short IMC_StrobeTimeBase_SetDuratio
long Value);
Visual Basic 6.0
IMC_StrobeTimeBase_SetDurationTime
As Long) As Integer
C#.NET 2003
Mavis. IMC_StrobeTimeBase_SetDurationTime(IntPtr Camera_Handle, Int32 Value);
Description:
This function set the Duration Time of Strobe. This function is workable only for the
Output Ports that are configured to STROBE_SIGNAL. The camera needs be
initialized with IMC_Camera_Init().
Parameters:
Camera_Handle
Value
Return:
ERROR_SUCCESSFUL
ERROR_CAMERA_CREATE
ERROR_DEVICE_UNINIT
ERROR_INVALID_CAMERA
ERROR_SOURCE_NOT_SUPPORT
++ Builder 6.
The handle for MAVIS camera. Use the handle gotten from the
'pHandle' parameter of IMC_Camera_Init().
The Duration Time of Strobe Control and allows value from 1
~85. By default, the Value is setting on 1.
- 91 -
0:
nTime (HA
NDLE Camera_Handle, unsigned
(ByVal Camera_Hand
Successfully
The Camera_Handle is NULL.
The specific camera has not been
initialized.
The handle is invalid.
The source signal is not supported by that
specific output port.
le As Long, ByVal Value