Table of Contents
Advertisement
IMC_Trigger_ReadConfiguration
Syntax:
Visual C++ 6.0 / Boland C++ Builder 6.0:
short
IMC_Trigger_ReadConfiguration( HANDLE Camera
unsigned short* pT
Visual Basic 6.0
IMC_Trigger_ReadConfiguration (ByVal Camera_Handle As Long, ByRef p
Boolean, By
Ref pTrigSource As Integer, ByRef pExpMode As Integer) As Integer
C#.NET 2003
Mavis. IMC_Trigger_ReadConfiguration( IntPtr Camera_Handle, out bool pStatus, out
Int32 pTrigSo
urce, out Int32 pExpMode);
Description:
This functio
n reads the
initialized with IMC_Ca
Parameters:
Camera_Handle
pStatus
pTrigSource
pExpMode
rigSource, unsigned short* pExpMode);
current setting for External Trigger. The camera needs be
mera_Init().
The handle for MAVIS camera. Use the handle
'pHandle' parameter of IMC_Camera_Init().
Enable or Disable camera external t
can be TRUE for trigger enable or FLASE for tri
default value of pStatus is FLASE.
The pointer to the integer that indicates the sett
Trigger Source. The Sources of Exte
following values:
EXT_TRIGGER_INPUT0 (0x00)
EXT_TRIGGER_INOUT1 (0x01)
EXT_TRIGGER_SOFTWARE (0x07)
By
default,
the
EXT_TRIGGER_INPUT0
The setting of Trigger Exposure Mode. The Exposure Mode can
be one of bellowing Settings:
EXT_TRIGGER_MODE0 (Programmable Mode)
EXT_TRIGGER_MODE1 (Level Mode)
By default, the Trigger Exposure Mode of iExpMode is
EXT_TRIGGER_MODE1
- 85 -
_Handle, bool* pStatus,
rigger function. The value
rnal Trigger may be one of
Trigger
Source
Status As
gotten from the
gger disable and
ings of Exte
rnal
of
iTrigSource
is
Advertisement
Table of Contents
