Table of Contents
Advertisement
(5) Once perfectly aligned with an empty slot, press the card firmly but
carefully in to the connector.
(6)
Anchor the board by replacing the screw.
(7) Using 1394 cable to connect MAVIS IM-30/IM-100 1394 camera to
1394 card and GPIO cable wiring if necessary. For image
acquisition test please refer to the "EZView Utility".
(8) Turn on the system and you will be able to find the 1394 Host
controller device with Device Manager.
(9) If you need to extend your
workin
g
distance,
using 1394 repeater directly.
DO NOT input DC power to 1394 repeater when using
IPC/PC platform. The DC power input may damage your
1394 card or 1394 host controller circuit.
please
- 26 -
Advertisement
Table of Contents
