Table of Contents
Advertisement
3 In
stallation Guide
MAV
IS IM-30/IM100 IEEE 1394 cameras support o
system platforms. This also installation gui
camera correctly and safely. Please read through this inst
follow the installation steps of your specified system platform.
3.1 Hardw
are
3.1.1 IPC/PC Platform
Some desktop PCs have a built-in 1394 port with 6-pin 1394 connector;
if your system is one of these, you will be able to use a 1394 cable
connect to your system 1394 port directly.
If you choose to use an IPC or your desktop PC without a built-in 1394
port, then please see the following steps to install your 1394 interface
card on a PCI bus:
(1) Remove the computer cover using the instructions from the
(2) Check that there is an empty PCI (32-bit) slot to accommodate the
(3) Remove the blank metal plate located at the back of the selected
(4) Carefully position the 1394 card in the selected PCI slot as
DO NOT open the
components ma
y d
amage camera functio
camera h
ousing then
warranty will be void immediat
Be careful not to a
llow liquids, flammable or m
Installation
computer manual.
card.
slot (if any). Keep the removed screw to fasten the 1394 card after
installation.
illustrated below. If using a tower computer, orient the board to suit
the board slots.
perat
de includes information on how to use this
CAUTION
camera hous
ing in any situation. Touching internal
n. Meanwhile when customer to open
etallic material inside of the camera.
- 25 -
ion in IPC, PC and Notebo
allation guide carefully
ely.
ok
and
Advertisement
Table of Contents
