Install The Handlebar Bushing Kit - Nautilus Schwinn 800IC Service Manual

Table of Contents

™

NOTICE: This document provides instructions for the installation of the Handlebar Bushing Kit on the Schwinn

be useful if the Handlebars cannot be locked into place.

If you need assistance, please call

side US/Canada). To find your local distributor, go to: www.nautilusinternational.com

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed

in China | © 2020 Nautilus, Inc. | Nautilus, the Nautilus logo, Bowflex and Schwinn are trademarks owned by or licensed to Nautilus, Inc., which are registered or otherwise protected by common law in the United States and

other countries. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause

injury to the service technician or bystanders.

• Keep bystanders and children away from the product being serviced at all times.

• Disconnect all power to the machine before you service it.

• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these

components. Do not try to do heavy or awkward steps on your own.

•

Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved replacement parts can adversely

affect the safety and functionality of the equipment creating a risk to users and will void the warranty.

•

Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or

replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact

Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.

• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.

• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.

SAVE THESE INSTRUCTIONS

•

Tools Required (not included)

Small Standard Screwdriver

32mm Wrench (or Adjustable)

Installation of the Handlebar Bushing Kit

on the Schwinn

IC4 / IC8 / 800IC and Bowflex

™

Nautilus

Customer Service(if purchased in US/Canada) or your local distributor (if purchased out-

C6 Bikes