Table of Contents
Advertisement
SINCLAIR
breakers provided by the vendor.
(9) If the power flexible wire is damaged, it must be replaced by professional personnel of the
vendor, maintenance center of the vendor, or relevant other department to avoid dangers.
6.2 Installation of Power Cord
6.2.1 Procedure for Installing the Power Cord
(1) Connect the power cord to the connecting terminal of the outdoor unit and fix it securely.
(2) Connect the other end of the power cord to the fixed circuit and fixed it securely. During
connection, pay attention to the live, neutral, and ground lines.
6.2.2 Selection of Power Cord Diameter and Circuit Breaker
Model
SWH-35ERA2
6.2.3 External Connection Diagram of the Unit
The external connection diagram for
water tank is shown in the following figure.
AIR SOURCE HEAT PUMP WATER HEATER SERVICE MANUAL
Table 6-1 Power configuration table
Minimum Cross-sectional Area (mm
Power Supply
Firing Line
220V-240V
1.5
~ 50Hz
SWH-35ERA2
Figure 6-1 External Wiring
Zero Line
Ground Line
1.5
1.5
equipped with SWH-200DE
37
)
2
Circuit Breaker Capacity (A)
16
Advertisement
Table of Contents
