Sinclair SWH-200DE Service And Installation Manual page 14

SINCLAIR
4.5.2 Timer Setting
Timer setting: Under the HOTWATER or SAVE mode or under the Off state, press the TIMER
button to enter the timer setting interface. The TIMER and ON icons are on and the hour value blinks.
Press ▲ or ▼ to adjust the hour value and press the TIMER button to confirm setting. Then the minute
value flickers. Press ▲ or ▼ to adjust the minute value and press the TIMER button to confirm setting.
Then the OFF icon is on and ON icon is off. The hour value blinks. Press ▲ or ▼ to adjust the hour
value and press the TIMER button to confirm setting. Then the minute value flickers. Press ▲ or ▼ to
adjust the minute value and press the TIMER button to confirm setting. After the scheduled on/off time
setting is saved, the main interface is displayed. In the setting process, if no button is pressed within 15s,
the main interface will be displayed and setting will not be saved.
Timer cancelling: After the scheduled on/off time is set, press the TIMER button to cancel it.
NOTE: The scheduled on time and off time cannot be the same; otherwise, the LCD switches to the
interface for resetting the timer.
Main interface
Setting is
complete and the
timer is started.
Cancel the timer.
AIR SOURCE HEAT PUMP WATER HEATER SERVICE MANUAL
Timer is on and
Press the
the hour value
TIMER button.
blink.
Timer is off and
the minute value
blink.
11
Timer is on and
Press the
the minute value
TIMER button.
blink.
Timer is off and
Press the
the hour value
TIMER button.
blink.