Gree GWH09AKCXD-K6DNA1A Service Manual page 80

Service Manual
Step
10. Remove motor support
Remove screws fixing the motor support and then
remove the motor support.
11. Remove cut off valve and valve support sub-assy
Remove screws fixing the cut off valve and then
remove the cut off valve;
Remove screws fixing the valve support subassy and
then remove the valve support subassy.
Note:
When pulling out the wiring terminal, pay attention to
loose the clasp and don't pull it so hard.
12. Remove isolation sheet
Remove the screws fixing the isolation sheet and then
remove the isolation sheet.
Installation and Maintenance
Procedure
screws
motor support
cut off valve
screws
screws
valve support sub-assy
isolation sheet
screws
77