Gree GWH09AKCXD-K6DNA1A Service Manual page 68

Service Manual
Step
Remove the screw fixing the left and right drive
motor; disconnect the wiring terminal in the motor
and then remove the drive motor
5. Remove electric box assy
Remove the screw fixing electric box 3, Remove
the electric box 3.
① Cut off the wire binder and pull out the
indoor tube temperature sensor.
② Screw off two grounding screw.
③ Remove the room temperature sensor.
Remove the wiring terminals of motor, left&right
swing motor, up&down swing motor and out-
pushing mechanism motor
Installation and Maintenance
Procedure
screws
Terminals
screws
Terminals
Grounding
screw
Wire binder
Room temperature
sensor
Wiring terminal
of motor
Terminals of up&down swing motor
and out-pushing mechanism motor
Indoor tube
temperature sensor
Terminal of left&right
swing motor
screw
Electric
Box 3
65