Page 2
If you lend your product to another party, inform that party of the safety-related operating pro- cedures and hand over this assembly guide. If you require additional copies of this manual, you can obtain them free of charge from TW AUDiO or download them from www.twaudio.de Instructions in this setup manual...
Page 3
Assembly Instructions ARBT24 Notes on the products Before using the arrayboard, carefully read the assembly instructions and keep the instruc- Read manual tions in a safe place together with the ARBT24 arrayboard. before use! General Information Assembly Guide: OM -ARBT24 Version 2.0 d, 02/2023...
4.5.1 B30 loudspeaker upright .................. 10 4.5.2 B30 loudspeaker cross ..................10 System setups with two T24(N) loudspeakers on the ARBT24 arrayboard ..... 11 4.6.1 0° alignment of the two T24(N) loudspeakers ............ 11 4.6.2 30° alignment of the two T24(N) loudspeakers ..........12 4.6.3...
The ARBT24 arrayboard may only be used by trained and qualified personnel. Personnel must check the ARBT24 for its full suitability before each use. WARNING When visible damage to any part of the ARBT24 arrayboard is detected, it must be decom- missioned immediately. WARNING When moving (assembling, dismantling, maintaining) the ARBT24 arrayboard, ensure suffi- cient space to prevent collisions with other objects.
Assembly Instructions ARBT24 3. Technical Data Data sheet maximum load capacity 2x T24(N) Dimensions (h x w x d) 18 x 882 x 600 mm [0,7 x 34,7 x 23,6 in] Weight 6,6 kg [14,55 lbs] Surface Warnex textured paint...
WARNING Please note that setting up the system setups always requires two persons! WARNING TW AUDiO recommends using only the accessories specified by TW AUDiO for securing and mounting loudspeakers. NOTE Wind load Before setting up the system outdoors, consider unexpected wind conditions at the opera-...
40°. General safety instructions for setting up the following groundstack variants Attach the ARBT24 arrayboard to the B30 loudspeakers using tension strap(s) with ratchet. Tension straps with ratchets are available in various lengths from TW AUDiO. WARNING...
Note that you can place the ARBT24 arrayboard on the B30 loudspeakers in two different ways. To do this, use all four of the ARBT24 arrayboard´s rubber feets and insert them into the corresponding millings for rubber feets on the two B30 loudspeakers.
Assembly Instructions ARBT24 System setups with two T24(N) loudspeakers on the ARBT24 arrayboard Note that you can place two T24(N) loudspeakers side by side on the ARBT24 arrayboard in the appropriate millings for rubber feets. NOTE Note that the four black dots represent the rubber feets on the T24(N) loudspeakers and the millings for rubber feets on the ARBT24 arrayboard.
Assembly Instructions ARBT24 4.6.2 30° alignment of the two T24(N) loudspeakers 30° Figure 4.6.2 - 30° alignment of the two T24(N) loudspeakers 4.6.3 45° alignment of the two T24(N) loudspeakers 45° Figure 4.6.3 - 45° alignment of the two T24(N) loudspeakers...
Assembly Instructions ARBT24 System setups with one T24(N) loudspeaker on ARBT24 arrayboard Note that you can only place one T24(N) loudspeaker on the ARBT24 arrayboard in the cor- responding millings for rubber feets for the following system setups. NOTE Note that the four black dots represent the rubber feets on the T24(N) loudspeaker and the millings for rubber feets on the ARBT24 arrayboard.
NOTE 1. Place all four B30 loudspeakers close together so that the ARBT24 arrayboard with the rubber feets fit exactly into the millings of rubber feets of the top two B30 loudspeakers.
NOTE 1. Place all four B30 loudspeakers close together so that the ARBT24 arrayboard with the rubber feets fit exactly into the millings of rubber feets of the top two B30 loudspeakers.
3. Then place the remaining two B30 loudspeakers on top of the first two B30 loudspeakers. 4. Then place the ARBT24 arrayboard with the rubber feets into the millings for rubber feets of the two upper B30 loudspeakers so that they fit exactly.
Assembly Instructions ARBT24 5. Transport and Storage Ensure that the surfaces of the arrayboard are not damaged during transport and storage. Moisture can penetrate through exposed wood surfaces and cause the wood to swell. NOTE This is why the product should be transported and stored in a safe, careful, dry and largely dust-free manner.
Assembly Instructions ARBT24 6. CE Declaration of Conformity Copy and translation of the original CE Conformity Declaration: We hereby declare that the below-referenced components by virtue of their design and con- struction, and in the configuration placed on the market by us, satisfy the safety and health requirements of the applicable EC directives.
Need help?
Do you have a question about the ARBT24 and is the answer not in the manual?
Questions and answers