Operation; Maintenance And Cleaning; Technical Data - HAEGER Design Chrome TW-25C.005A Manual

Operation

Check before switching on!
DANGER! Risk of injury! The device may only be put into operation if no errors are
found during the check. If a part is defective, it must be replaced before the next use.
Check the safe condition of the device:
− Check if there are any visible defects.
− Check whether all parts of the device are securely mounted.
Electrical connection
Connect the mains cable to the wall socket. The cable is equipped with an ON/OFF switch.
When the switch is turned ON the button is lit.
Working mode
The heating element is equipped with a liquid sensor that switch on when the
temperature is lower than 55°C and stops automatically when it reaches 70°C with a
tolerance of ±5°C.

Maintenance and Cleaning

DANGER! Risk of injury! Always pull out the mains plug before working on the
device.
The product does not require any type of maintenance. We recommend that all parts of
the product are kept clean (behind, underneath, upper fins, etc.). Do not use any abrasive
product on the steel main body. Clean it with a damp cloth and a pH neutral soap, and the
control panel with a dry cloth.

Technical Data

Rated voltage
Rated input frequency
Rated power
Working temperature
Protection class
Dimensions
TW-25C.005A
220-240V~
50-60Hz
55 °C – 70 °C
625 x 400 mm
6
English -
250W
Class I