Advertisement
Step 2. Install your seat post.
E.
Locate the rubber seatpost seal and slide it onto the seatpost, tapered
side up.
F.
Locate the minimum insertion line on the seatpost.
G.
Insert the seatpost into the frame beyond the minimum insertion line,
then hand tighten the seatpost wedge using the Allen key, enough so
the seatpost can't be pulled from the frame. It will be fully tightened
later.
H.
Carefully lift the bike from the box and gently place the fork ends on
the ground.
SET-UP
STEP 1
STEP 2
STEP 3
E
F
G
H
STEP 4
PRE-RIDE CHECK
Advertisement
