Cannondale Alloy Road Rim Quick Start Manual page 4

Getting your bike ready for assembly.

This video applies to one Cannondale Platform:

• Topstone Carbon, Synapse Carbon, Super X

Let's get your bike out of the box.

First, locate the staples on the top of the box and carefully remove

them with a screwdriver. Use caution: the staples are sharp.

Inside the box, you'll find a smaller box of parts, necessary tools,

documentation and manuals. Once the bike is assembled, but

before you ride, please read the owner's manual.

Push the hand flaps from the inside to the outside of the box. This

will make removing the bike easier.

Carefully lift the bike out of the box and set it onto the top of the box.

Next, remove the front wheel from the bike and set it aside. Remove

all additional packaging from the bike, letting the handlebar gently

hang from the frame.

Carefully lift and rotate the bike, lowering it gently back into the box

with the fork overhanging the box side.

SET-UP

STEP 1

STEP 2

STEP 3

Tools Needed:

• Flat-Head Screwdriver

• Phillips-Head Screwdriver

• Box Cutter

• Scissors

Tools Included:

• Torque Wrench

• Allen Keys

• Pedal Wrench

Gently lift your bike out of the box and set

it on top of the box. Make sure the attached

wheel is facing upwards

STEP 4

PRE-RIDE CHECK