Advertisement
Some final pre-ride checks.
E.
In the riding position, you should have a slight bend in your leg when
the pedal is at the bottom of the rotation.
F.
Reflectors. Ensure the rear reflector is pointing straight back, and
the front reflector points straight ahead, perpendicular to the ground.
Gently pull the wheel reflectors toward the rim to ensure they are
snug
G.
Twist Checks. Grab the front and back of the saddle and attempt to
tilt it on the seatpost head. It should not move.
H.
Attempt to rotate the handlebar forward and backward in the stem. If
it moves, the stem faceplate bolts are not tight enough. Use the torque
wrench and correct bit to torque the faceplate bolts to specification,
using the same "X" pattern as before.
SET-UP
STEP 1
STEP 2
STEP 3
E
F
G
H
STEP 4
PRE-RIDE CHECK
Advertisement
