Advertisement
Some final pre-ride checks.
I
I.
Secure the front wheel between your legs and turn the handlebar.
If the handlebar and wheel move independently, the stem bolts are
not tight enough. Use the torque wrench and correct bit to properly
torque the bolts.
J.
Brake Check. Ensure the quick releases on your front and rear brake
J
calipers are closed and locked into place.
K.
Confirm the front and rear brakes engage when the levers are
squeezed. The brake lever and handlebar should not come into
contact with the brakes fully engaged.
L.
Wheel Engagement. Verify the front quick-release skewer is
tightened securely and the lever sits behind the fork leg. When
K
properly tightened, the lever should leave a mark in your hand.
M.
Tire Pressure. Inflate the tires to the manufacturer's recommended
tire pressure, which is marked on the tire sidewall.
L
SET-UP
STEP 1
STEP 2
STEP 3
STEP 4
PRE-RIDE CHECK
Advertisement
