Daily Use - Electrolux KOAAS31X User Manual

Put the test paper into
water for about 1 sec. Do
not put the test paper un‐
der running water.
The colours of the test paper continue to change. Do not check water hardness later than 1 min after test.
You can change the water hardness level in the menu: Settings / Setup / Water hardness.
The table shows water hardness range (dH) with the corresponding level of Calcium deposit
and the water classification. Adjust the water hardness level according to the table.
Water hardness
Level dH
1 0 - 7
2 8 - 14
3 15 - 21
4 ≥22
When the tap water hardness level is 4, fill the water drawer with still bottled water.

6. DAILY USE

WARNING!
Refer to Safety chapters.
6.1 How to set: Heating functions
Step 1 Turn on the oven.
Step 2 Select a heating function.
The display shows the default heating functions. To see more heating functions press:
Step 3
Press:
170°C
-5°C
Step 4 Move the finger on the slider to set the temperature.
Step 5
Press:
Shake the test paper to re‐
move the excess of water.
Test paper
. The display shows the temperature settings.
70°C 170°C
.
After 1 min, check water
hardness with the table
below.
Calcium depos‐
it (mmol/l)
0 - 1.3
1.4 - 2.5
2.6 - 3.8
≥ 3.9
210°C OK
+5°C
Set the water hardness lev‐
el: Menu / Settings / Setup /
Water hardness.
Calcium de‐ Water classifi‐
posit (mg/l) cation
0 - 50
51 - 100 moderately hard
101 - 150
≥151 very hard
ENGLISH
soft
hard
.
11