Siemens SINUMERIK 840D sl Equipment Manual page 16

Fundamental safety instructions
2.4 Security information
For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity.
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customer's exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/cert.
Further information is provided on the Internet:
Industrial Security Configuration Manual
view/108862708)
Unsafe operating states resulting from software manipulation
Software manipulations, e.g. viruses, Trojans, or worms, can cause unsafe operating states in
your system that may lead to death, serious injury, and property damage.
• Keep the software up to date.
• Incorporate the automation and drive components into a holistic, state-of-the-art industrial
• Make sure that you include all installed products into the holistic industrial security concept.
• Protect files stored on exchangeable storage media from malicious software by with suitable
• On completion of commissioning, check all security-related settings.
16
WARNING
security concept for the installation or machine.
protection measures, e.g. virus scanners.
(https://support.industry.siemens.com/cs/ww/en/
Equipment Manual, 12/2022, A5E50751046B AA
Operator panel front: OP 010S