6.1.2
REMOTE MODE ACTIVATION
The "Remote" mode allows forwarding an audio/video or audio only call to a smartphone with Android or
iOS operating system.
ATTENTION! The call forwarding function must have been activated on the video door phone (for more
details on the procedure refer to the
function").
The Urmet CallMe App must be installed on the smartphone, connected to the Internet through
mobile data connection, or even WiFi, in order to receive the call. (for more information on the
CallMe App, refer to the system technical manual available at www.urmet.com).
On the homepage, select the icon
The following icon
To disable the "Remote" mode, select the icon
displayed again.
6.1.3
DIVERSION MODE ACTIVATION
The "Diversion" mode allows the call to be diverted to a contact in the book.
ATTENTION! The call diversion function must have been activated on the video door phone (for more details
on the procedure refer to the
On the Homepage, select the icon
mode.
The following icon
To disable the "Diversion" mode, select the icon
is displayed again.
6.2 MUTE FUNCTION CONFIGURATION
The following parameter allows configuring and activating one of the modes of the MUTE function.
On the Homepage, select the icon
function.
The following icon
muted until the next time the mode is changed, or by pressing the key
50
Parameter configuration booklet
and press the key
is displayed to confirm the status change of the video door phone.
Parameter configuration booklet
and press the key
is displayed to confirm the status change of the video door phone.
and press the key
activates the MUTE function without time limits; the video door phone will be
in chapter "Call forwarding
twice to enable the "Remote" mode.
and press the key
in chapter "Call diversion function").
three times to enable the "Diversion"
and press the key
to configure the operating mode of the
.
until the icon
until the icon
DS1761-038
is
Need help?
Do you have a question about the iPercom VOG 5+ 1761/15 and is the answer not in the manual?
Questions and answers