5.6. SWITCHBOARD CALL OR INTERCOM CALL
The call to the switchboard or the intercom call can be made if such functions have been configured by the
installer.
SWITCHBOARD CALL
This function allows to establish a conversation with the gatekeeper lodge switchboard.
The call to the switchboard is forwarded only to the competent switchboards.
To make a call, proceed as follows: With the video door phone in "Standby" or "Functions and notifications"
status, press the key
.
This will allows accessing the video door phone book; the keys:
,
,
and
light up and
remain steady on. Press the key
to start the call. The display shows the following screen:
If, in the event of an intercom call, the switchboard or the user picks the call up within the pick-up time,
communication is started straight away and the LED of key
starts flashing on the video door phone.
If the switchboard or a user do not answer within the pick-up time, the call is ended and the video door
phone display shows the following screen page:
By pressing the following
,
,
and
keys it is possible to activate the respective function (for
Button
function).
further details see chapter
Press the key
to terminate the call and the display switches off.
41
DS1761-038
Need help?
Do you have a question about the iPercom VOG 5+ 1761/15 and is the answer not in the manual?
Questions and answers