Table of Contents
Advertisement
I. Hazard Definitions
The following terms are used throughout this manual to bring attention to the presence of hazards of various risk
levels, or to important information concerning product life.
It is critical all personnel read and adhere to all information contained in DANGER, WARNING, and CAUTIONS. All
DANGERS, WARNINGS, and CAUTIONS are for reference and guidance purpose, and, therefore, do not substitute
for strict adherence to applicable jurisdictional and professional codes and regulations.
DANGER
Indicates an imminently hazardous situation which, if not
avoided, will result in death, serious injury or substantial
property damage.
WARNING
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death, serious injury, or substan-
tial property damage.
II. Read Before Proceeding
A. Local Codes
1. This unit shall be installed in accordance with those
installation regulations enforced in the area where
the installation is to be made. These regulations
shall be carefully followed in all cases. Authorities
having jurisdiction shall be consulted prior to
installation.
2. This unit must be installed and serviced by a
licensed electrician or certified gas supplier.
3. The City of New York requires a Licensed Master
Plumber to supervise the installation of this
product.
4. The Commonwealth of Massachusetts requires
this product to be installed by a Licensed Plumber
or Gas Fitter.
B. Warranty
1. This product has a limited warranty, a copy of which
is shipped with the unit. It is the responsibility of
the installing contractor to ensure all controls are
correctly installed and are operating properly.
2. Factory warranty does not apply to units improperly
installed or improperly operated.
4
DANGER
CAUTION
CAUTION
Indicates a potentially hazardous situation which, if
not avoided, may result in moderate or minor injury, or
property damage.
NOTICE
NOTICE
Indicates special instructions on installation, operation,
or maintenance which are important but not related to
personal injury hazards.
3. Heat exchanger failure due to lime (scale) build-
up in the heat exchanger is not covered under the
manufacturer's warranty.
4. It is the responsibility of the customer to ensure
water quality adheres to the requirements in Table
20.
C. Shipment Damage
1. Upon receiving the unit, inspect for signs of
shipping damages. If the unit has been hit or
otherwise mishandled, immediately notify the
carrier.
2. Verify total number of factory supplied items as per
the packing slip with received parts.
D. Connecting Gas Supply Line
1. Connect supply gas line to the appliance gas train
at the rear of the appliance.
DANGER
Failure to prevent the gas line from turning could damage
the gas train components on the appliance (gas valve,
blower, etc.).
DANGER
AMP 400-1000L I&O Manual
Advertisement
Table of Contents
