Page 1
Nut M6 Use Liquid Thread Locker SRC Design uses Met ric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the Torque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
Orient the Top plate (3), as shown in the drawing (it has the cut- out to clear the gusset feature of the Side stand) and visually orient the 4 mounting holes to the plate clusters below. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Mounted Condition” of the Large Side Stand. It improves the foot print of the OE feature and improves the static stability, when the Motorbike is parked using the Side stand. Copyright By SRC Design and Specification are subjected to change Page 4...
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.