SRC BMW-R1250GS-13-01-SL Installation

Kick stand sensor guard – bmw r1250 gs

Download this manual

Scope of Supply/Bill of Material & Mounting Drawings

Part Number: BMW-R1250GS-13-01-SL / BMW-R1250GS-13-02

Part Description: KICK STAND SENSOR GUARD – BMW R1250 GS

Installation / Parts List / Bill of Material for Mounting

Design and Specification are subjected to change

Page 1

Need help?

Do you have a question about the BMW-R1250GS-13-01-SL and is the answer not in the manual?

Page 1 Scope of Supply/Bill of Material & Mounting Drawings Part Number: BMW-R1250GS-13-01-SL / BMW-R1250GS-13-02 Part Description: KICK STAND SENSOR GUARD – BMW R1250 GS Installation / Parts List / Bill of Material for Mounting Copyright By SRC Design and Specification are subjected to change...
Page 2 MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3 Lead the Cable tie – 2 off, as shown, and inserting them into the slots in the Guard, tie it around the Stand stem. SRC Kick Stand Sensor Guard protects the, sensor, its mount and the sensor connector, as shown.
Page 4 Vehicle. It is always advised to check loosening of the fasteners after the first 50 kilo meters of ride and at regular intervals. 7. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC 8.To the maximum extent possible, our design use the current Mounting/Fitment of the Original Equipment, so that Installation of these accessories will not affect the Payload or Function of the Vehicle or the Part on which it is mounted to protect it.

Bmw-r1250gs-13-02