Advertisement
Quick Links
Scope of Supply/Bill of Material & Mounting Drawings
Part Number: NC750-14-01-SL
Part Description: Large Side Stand – Honda NC750X (2012-2020)
Installation / Parts List / Bill of Material for Mounting
No. Description
1
Middle Plate
2
Top Plate
3
Bottom Plate
4
Countersunk Head Screw M6 x 20
5
Nut M6
SRC Design uses Metric System of Measurement and all dimensions are in Millimeters
* Recommended to use the Torque specified in the table
** Denotes Usage of Liquid Thread Locker in specified locations
Copyright By SRC
Design and Specification are subjected to change
Quantity Torque * (N-m) Remarks **
1
1
1
4
9 - 10
4
9 - 10
Use Liquid Thread Locker
Use Liquid Thread Locker
Page 1
Advertisement
Related Manuals for SRC NC750-14-01-SL
Summary of Contents for SRC NC750-14-01-SL
- Page 1 9 - 10 Use Liquid Thread Locker SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
-
Page 2: Mounting Drawings
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2... - Page 3 Side Stand, drawn to the sides, to have access to the mounting of Large Side stand. Side Stand looks as shown, prior to the Start of the Installation of SRC Large Side Stand. Step 1: Orient and Slip-in the Middle Plate (1), as shown.
- Page 4 Slide-in the Top Plate (2), as shown and orient the mounting holes in-line with the 4 Projecting screws. Step 4: Secure the threads on the screw using M6 Nut (5), as shown. Copyright By SRC Design and Specification are subjected to change Page 4...
- Page 5 Ensure all Mounting orientations visually and ensure No slackness between the Top, Middle and Bottom plates, and tighten the Nuts to the torque as specified in the BOM table. Copyright By SRC Design and Specification are subjected to change Page 5...
- Page 6 Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.