SRC R-HM22-28-02-L Quick Start Manual

R-HM22-28-02-L

HIMALAYAN 410 2022

Description

NO.

LH - oil tank bracket

Socket button head screw M5x25mm

Washer M5

Rubber Sheet

AD-PART-OIL-Tank-01

BLACK CABLE TIE

Oil-Tank-2

Oil-Tank-3

Oil-Tank

Hex ange nut gradea M5

Nut plate

SRC Design uses Metric System of Measurement and all dimensions in Millimeters

Recommended to use the Torque speci ed in the table

Design and Speci cation are subjected to change

Installation / Parts List / Bill of Material for Mounting

Quantity

Torque*(N-M)

5-6

Denotes Usage of Liquid Thread Locker in speci ed Locations

Remarks**

Use Liquid Thread Locker

Table of Contents

Do you have a question about the R-HM22-28-02-L and is the answer not in the manual?

Page 1 Oil-Tank Hex ange nut gradea M5 Nut plate SRC Design uses Metric System of Measurement and all dimensions in Millimeters Recommended to use the Torque speci ed in the table Denotes Usage of Liquid Thread Locker in speci ed Locations...
Page 2 By SRC Design and Speci cation are subjected to change...
Page 3 By SRC Design and Speci cation are subjected to change...
Page 4 Mounting lnstructions Put parts (socket button head screw m5x25mm) and parts(washer m5) on parts( LHorRH oil tank bracket). Assemble the parts as shown in the picture. copyright By SRC Design and Speci cation are subjected to change...
Page 5 Remove the original parts from the motorcycle. take the assembled parts Comes assembled with the original place as shown in the picture. Bring (Black cable tie) to attach to the motorcycle. copyright By SRC Design and Speci cation are subjected to change...
Page 6 Take the fuel tank in and after that use the ( oil-Tank-3) dial to t it rmly in your hand. Check and check the tightness of the assembled parts. copyright By SRC Design and Speci cation are subjected to change...
Page 7 Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’ s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.