Advertisement
Step 1:
During Mounting the Large Side Stand, let the Motorbike firmly rest
on the floor, using the Centre Stand.
The Middle Plate (2) serves as the Sandwich between the Top Plate
and the Bottom plate. Orient the Middle Plate (2) as shown in the
drawing. It has a cut-out and it clears the Side stand base, but
slightly hugs the Side stand base, around its periphery.
Step 2:
Orient the Bottom plate (1) as shown in the drawing and
visually orient and align the 4 mounting holes of the bottom
plate and the Middle Plate (2).
Orient the Top plate (3), as shown in the drawing (it has the cut-
out to clear the gusset feature of the Side stand) and visually
orient the 4 mounting holes to the plate clusters below.
Copyright By SRC
Design and Specification are subjected to change
Page 3
Advertisement
