Installation; Transport - Siemens Hematek 3000 System Instruction Manual

3 Life cycle
Clean platen
Clean waste tank
Clean exterior surfaces
3.4 De-installation
3
3.5

Transport

3 8
10. Clean the platen, see Chapter 6.4.
11. Clean the waste tank, see Chapter 6.5.
12. Clean the exterior surfaces, see Chapter 6.2.
To de-install the system, proceed as follows:
1. Prepare the system for non-operation, see Chapter 3.3.
2. If you want to store the system, make sure that the storage location
meets the storage and transportation conditions, see Environmental on
page 9-3.
To transport the system, proceed as follows:
1. Prepare the system for non-operation, see Chapter 3.3.
2. Screw the two leveling feet at the front all the way up.
Note: Always transport or ship the system in the transport container as
the transport container will afford the best protection.
®
Hematek 3000 System – Instruction Manual – Version 1.3