Siemens Hematek 3000 System Instruction Manual page 84

8 Troubleshooting
8
Remove waste tank
8 12
To verify the pump volumes, proceed as follows:
WARNING
The Hematek Stain Pak contains methanol. Risk of very serious
irreversible effects through inhalation, in contact with skin, and if
swallowed
Death or serious injury can result.
• Keep the containers of the Hematek Stain Pak tightly closed.
• Wear appropriate personal protective equipment; that is, gloves,
protective clothing, safety glasses and mask.
• Pay attention to the manufacturer's information regarding the gloves'
compatibility with the materials and liquids used.
• Avoid contact with eyes and skin.
• In case of contact with eyes or skin, immediately rinse the affected area
with plenty of water for at least 15 minutes.
• In the event of an accident or if you feel unwell, seek medical advice
immediately and show the label if possible.
• Refer to the Hematek Stain Pak labeling and to Material Safety Data
Sheets for more information on first aid measures. Material Safety Data
Sheets are available from Siemens.
WARNING
Risk of burns by combustion of flammable liquids. The Hematek Stain
Pak contains methanol which is highly flammable.
Death or serious injury can result.
• Do not install and operate the system in the proximity of sources of
ignition, for example, ovens, hot plates, burners, radiators, or open
flames.
• Refer to the Hematek Stain Pak labeling and to Material Safety Data
Sheets for details concerning any special precautions related to the
handling of Hematek Stain Paks. Material Safety Data Sheets are
available from Siemens.
1. Remove the waste tank, see Chapter 6.5.
®
Hematek 3000 System – Instruction Manual – Version 1.3