Pro Devices For Support Arm (Extendable, Round Tube) - Siemens SIMATIC V2 Operating Instructions Manual

3.3.3

PRO devices for support arm (extendable, round tube)

Requirement
• One of the following support arm systems:
– Support arm with round tube end with outside diameter 48.3 mm, appropriate for the
– Support arm with mechanical interface, appropriate for the flange of the flange mount
– Support arm with mechanical VESA interface, the corresponding Siemens adapter set
See also section "System components for PRO devices (Page 20)".
• The PRO device, all packaging components and protective films have been removed
• The lower cover of the PRO device from the accessory kit
• Torque screwdriver with T20 insert
• The following cables are fed through the support arm to which the device is mounted:
– Equipotential bonding cable
– Power supply cables
– Data cables, e.g. USB, DisplayPort or Ethernet cable
IFP V2, IFP V2 PRO, IFP V2 ETH
Operating Instructions, 03/2023, A5E46641410-AE
opening of the PRO device
When selecting the round tube, ensure that its inside diameter is large enough so that
all needed cables and their connectors can fit through.
adapter, and Siemens flange mount adapter (not included in product package)
and the Siemens flange mount adapter (not included in product package)
Installing and connecting the device
3.3 Mounting the PRO device
51