Table of Contents
Advertisement
Overview
1.6 System components and accessories
1.6.2
System components for PRO devices
Base adapter
You use the base adapter to mount PRO devices for support arm (not extendable, flange top)
or for pedestal (extendable, flange bottom) on the support arm or on the pedestal. A base
adapter is included with the product package of the corresponding PRO device. The base
adapter can also be ordered separately.
①
②
③
④
⑤
Article number: 6AV7674-1KA00-0AA0
Adapter sets and couplings
The following mechanical adapter versions are also available for mounting a PRO device
for support arm (not extendable, flange top) or for pedestal (extendable, flange bottom) via
the base adapter:
• Adapter set VESA75 for VESA75-compatible systems, Article number
6AV7674-0KE00-0AA0
• Adapter set VESA100 for VESA100-compatible systems, Article number
6AV7674-0KD00-0AA0
In addition, other manufacturers offer support arm or pedestal systems with mechanical
interfaces or adapters for Siemens PRO devices, e.g. RITTAL, ROLEC, BERNSTEIN, HASEKE,
ROSE. Observe the specifications provided by the respective manufacturer.
20
Seal
Channel cable
Mechanical interface to the PRO device
Cover
Mechanical interface to the support arm or pedestal including seal
IFP V2, IFP V2 PRO, IFP V2 ETH
Operating Instructions, 03/2023, A5E46641410-AE
Advertisement
Table of Contents
