Siemens SIMATIC V2 Operating Instructions Manual page 19

• A ferrite for the power supply cables, white
• One ferrite for the Ethernet line to the IFP, black
Functions of the "LNK" LED
• LED lit green: Active link available
• LED not illuminated: No active link available
AC power supply unit for built-in devices
Connect a built-in device to the power supply via the AC power supply unit, input voltage
range 100 ... 240 V. Use the supplied mounting material to fasten the AC power supply unit
on the rear of the built-in device.
Article number of the AC power supply unit: 6AV7860-3PA00-0AA0
You can find the documentation for the AC power supply unit via the article number on the
Internet (https://support.industry.siemens.com).
Do not use the power supply unit in hazardous areas.
The power supply unit is not approved for use in hazardous areas. If the power supply unit is
mounted on a built-in device with Ex approval, the Ex approval of the built-in device expires.
Operation of the power supply unit in a hazardous area may result in an explosion, death or
serious injury.
Never operate the power supply unit in a hazardous area.
IFP V2, IFP V2 PRO, IFP V2 ETH
Operating Instructions, 03/2023, A5E46641410-AE
WARNING
1.6 System components and accessories
Overview
19