Inflate Tires - Slime PRO POWER Manual

INFLATE TIRES

1. Attach quick connect air hose onto tire's valve stem and pull lever up to lock.
2. Plug power cord into 12 volt accessory power outlet.
3. Press on switch to turn on inflator. Inflate tire to manufacturer's recommended air pressure.*
When proper pressure is reached, press off switch to turn off inflator. Unplug power cord
and remove air hose connector.
*NOTE: Correct tire pressure can be found in vehicle owner's manual or on driver's side door
jamb.
USING THE COIL HOSE AND ADAPTERS
PULL
UP TO
LOCK
PULL
DOWN
TO UNLOCK
1. To unlock the quick connect, pull handle down.
2. Place end of coil hose or adapter into connector and pull up on handle to lock in coil hose
or adapter.
12V
PULL
UP TO
LOCK
PULL
DOWN
TO UNLOCK