Table of Contents
Advertisement
Sending Faxes
Using BROADCAST keys
The document will be scanned and stored into memory when using a BROADCAST key. After transmission,
the stored document will be erased automatically.
The memory capacity is approx. 120 pages based on the CCITT No. 1 Test Chart in standard resolution.
For the CCITT No. 1 test chart, see page 129.
1
Insert the document FACE DOWN.
Press the preset (BROADCAST) key.
2
≥The document will be fed into the unit and
scanned into memory. The unit will then transmit
the data to each station, calling each number
sequentially.
Note:
≥While scanning, do not move the pages which have
already ejected. A paper jam may occur. Allow the
scanning process to finish before viewing documents.
≥If you select the fine, super fine or half tone resolution,
the number of pages that the unit can transmit will
decrease.
≥If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all other stations have been
called.
Broadcast report
After all of the transmissions have been completed, the unit will automatically print the following report.
Sample of a broadcast report:
BROADCAST REPORT 1
NO.
OTHER FACSIMILE
01
Mike
02
Peter
03
Sam
04
Kim
56
START TIME
USAGE TIME
Jan. 10 03:31PM
01'10
Jan. 10 03:33PM
01'08
Jan. 10 03:34PM
01'09
Jan. 10 03:35PM
01'10
TOTAL
004'37
Total number of
pages sent to
the fax server.
(BROADCAST)
(STOP)
(START/SET/COPY)
To cancel the broadcast setting
1. Press (STOP) while the unit displays
"BROADCASTING".
Display:
2. Press (START/SET/COPY).
Jan. 10 1999 03:36PM
PAGES (IQ-FAX)
RESULT
02
OK
OK
02
OK
02
OK
02
(008)
008
This mark shows the
fax has been sent to
the fax server.
SEND CANCELED?
YES: PRESS SET
Advertisement
Table of Contents
