Table of Contents
Advertisement
Operations
General (cont.)
Problem
The PANA LINK does not work
properly.
Transmission
Problem
I see a "Sending a fax failed."
message.
I see a "No response" message.
I cannot make an international
transmission.
Reception
Problem
The fax machine receives a fax, but I
want to receive it with the PC.
The PC receives a fax, but I want to
receive it with the fax machine.
I want to print out the received fax
with another printer.
The "Receiving a fax failed."
message is displayed.
Scan and copy
Problem
I cannot scan.
112
≥Click the
button to exit PANA LINK, and restart.
If PANA LINK does not closed, please force it to close by pressing
Ctrl+Alt+Delete keys.
≥Possible causes are as follows.
—Telephone circuit is not good.
—You received a call-waiting signal.
—The other party stopped reception.
—The other party ran out of the recording paper.
Transmit again after confirming with the other party.
≥The other party did not answer the call or the line was busy.
Transmit again after waiting a while.
≥The the dialing mode setting (tone or pulse) is not correct.
Open the Setup dialog box and confirm the dialing mode setup
check box in the Line tab.
≥Set the fax machine to the overseas transmission mode (p. 57).
≥You probably checked the [Receive directly to Facsimile Unit]
check box to activate in the Reception tab in the Setup dialog box.
If so, click this check box to deactivate.
≥The setting of the PC LINK on the fax machine is off. Turn it on
(p. 104).
≥The PANA LINK application does not operate. Start the PANA LINK
application.
≥Open the Setup dialog box, then check the [Receive directly to
Facsimile Unit] check box to activate in the Reception tab.
≥Print after selecting the desired printer from the Print dialog box.
≥Possible causes are as follows.
—The line condition was not good.
—The reception was interfered with the call waiting signal.
Check with the other party and try again.
≥The facsimile unit is probably busy. Try again after the other
operation is completed.
≥There might not be enough free space on the hard disk. Try again
after deleting unnecessary files or closing unused applications.
≥There might not be enough RAM. Try again after closing some
applications.
≥Restart the PC, then try again.
For assistance, call 1-800-435-7329.
Cause & Remedy
Cause & Remedy
Cause & Remedy
Cause & Remedy
Advertisement
Table of Contents
