Table of Contents
Advertisement
PC Fax
Sending a file from the PANA LINK window
1
Open the PANA LINK main panel.
Click [Send\a\fax] in the main panel.
2
≥The Send fax panel will be displayed.
Click [Browse] in the Send fax panel.
3
≥The Open file dialog box will be displayed.
Note:
≥If the line is busy or there is no answer, the PANA LINK Fax will automatically redial the number up to
5 times.
≥To cancel transmission after dialing, click [STOP] in the main panel.
≥If you send a fax using a PC, the FaxSav service cannot be used (p. 46).
≥When you click [START] to send the selected file, any document set on the fax machine will also be sent at
the same time.
94
4
Select a file you want to send, and then click
[Open]
.
≥An image of the file will be displayed in the
preview window.
5
Set the fax number which you are going to
send the file to.
≥To set the telephone number, you can use
the keypad, one-touch dialing or the address
book.
Keypad
Address book
Click [START] in the main panel.
6
≥The document will be sent.
≥If an application which creates the file starts,
follow the instructions for the application to
send the file.
One-touch
dialing
Advertisement
Table of Contents
