Setup
Setting your logo
The logo can be your company, division or name.
Press (MENU).
1
Display:
Press (#), then (0)(2).
2
Press (START/SET/COPY).
3
4
Enter your logo, up to 30 characters, by using the
dial keypad. See next page for details.
Example: Bill
1. Press (2) twice.
2. Press (4) six times.
3. Press (5) six times.
4. Press (fl) to move the cursor to the next space
and press (5) six times.
Press (START/SET/COPY).
5
Press (MENU).
6
To correct a mistake
≥Press (fi) or (fl) to move the cursor to the
incorrect character, then make the correction.
To delete a character
≥Move the cursor to the character you want to
delete and press (STOP).
30
1.SYSTEM SET UP
YOUR LOGO
LOGO=
LOGO=B
Cursor
LOGO=Bi
LOGO=Bil
LOGO=Bill
SETUP ITEM [
]
To insert a character
1. Press (fi) or (fl) to move the cursor to the right
2. Press (INSERT) (One-Touch Dial key 2) to insert
/
STOP
START/SET/COPY
Note:
≥You can enter your logo by rotating
(JOG\DIAL) (see next page).
of where you want to insert the character.
a space and enter the character.
HYPHEN
MENU
INSERT
JOG DIAL