Table of Contents
Advertisement
Sending a fax using the JOG DIAL
Before using this feature, program the desired names and telephone numbers into the directory (p. 39).
1
Open the document feeder tray.
2
Adjust the width of the document guides to the size
of the document.
3
Insert the document (up to 15 pages) FACE DOWN
until the unit grabs the document and a single beep
is heard.
Display:
If necessary, press (RESOLUTION) repeatedly to
4
select the desired setting (p. 43).
Rotate (JOG\DIAL) until the desired name is
5
displayed.
Example:
≥To confirm the number, press (NAME/TEL\NO.).
Press (START/SET/COPY).
6
≥The unit will start transmission.
Helpful hints:
≥You can confirm the stored items on the display (p. 41)
or on the telephone number list (p. 123).
≥The connecting tone will be heard during dialing to tell
you the status of the other party's machine (p. 59).
Note:
≥While scanning, do not move the pages which have
already ejected. A paper jam may occur. Allow the
scanning process to finish before viewing documents.
≥If the desired name has not been stored, press (STOP)
and dial the number manually.
≥For further details about using the JOG DIAL, see
page 41.
STANDARD
Alice
FAX=<Alice>
CONNECTING.....
Sending Faxes
directory!
Document
feeder tray
(STOP)
(NAME/TEL\NO.)
(JOG\DIAL)
(MONITOR)
(RESOLUTION)
(START/SET/COPY)
If your unit cannot send a fax
Verify that the number dialed is answered by
the other party's machine.
1. Rotate (JOG\DIAL) until the desired name is
displayed.
2. Press (MONITOR).
Document guides
45
Advertisement
Table of Contents
