Panasonic KX-FLM661 Operating Instructions Manual

Multi-function laser fax
Hide thumbs Also See for KX-FLM661:
Table of Contents

Advertisement

Do NOT connect the unit to a computer with the USB cable until prompted to do so during the setup
of Multi-Function Station (CD-ROM).
1
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
L This unit is compatible with Caller ID. Subscription to the appropriate service through your
service provider/telephone company is required.

Operating Instructions

Model No.
2
Multi-Function Laser Fax
KX-FLM661
KX-FLM671

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic KX-FLM661

  • Page 1: Operating Instructions

    Multi-Function Station (CD-ROM). For hearing or speech impaired TTY users, TTY: 1-877-833-8855 L This unit is compatible with Caller ID. Subscription to the appropriate service through your service provider/telephone company is required. Operating Instructions Multi-Function Laser Fax KX-FLM661 Model No. KX-FLM671...
  • Page 2 Thank you for purchasing a Panasonic fax machine. You can select the English or Spanish language. The display and reports will be in the selected language. The default setting is English. If you want to change the setting, see feature #110 on page 50.
  • Page 3: Important Information

    L For optimal performance, genuine Panasonic toner cartridges and drum units are recommended. We cannot be responsible for problems that may be caused by a non-Panasonic toner cartridge or drum unit: – Damage to the unit – Poor print quality –...
  • Page 4: Illegal Copies

    This list is not inclusive and no liability is assumed for either its completeness or accuracy. In case of doubt, contact your legal counsel. Notice: L Install your machine near a supervised area to prevent illegal copies from being made. For assistance, please visit http://www.panasonic.com/help...
  • Page 5: Table Of Contents

    1. Introduction and Installation 1. Table of Contents Accessories Supplied accessories ... 7 Accessory information ... 8 Finding the Controls Button descriptions... 8 Overview ... 9 Installation Toner cartridge and drum unit ... 10 Paper tray and paper tray cover ... 12 Paper stacker...
  • Page 6: Table Of Contents

    Table of Contents 11.3 Canceling the operations... 62 12.Help Reports and Displays 12.1 Report messages ... 63 12.2 Display messages ... 64 Troubleshooting 12.3 When a function does not work ... 66 13.Paper Jams Jams 13.1 Recording paper jam ... 74 13.2 Document jams –...
  • Page 7: Introduction And Installation

    Accessories 1 Introduction and Installation 1For assistance, please visit http://www.panasonic.com/help 1.1 Supplied accessories 1 Toner cartridge 2 Drum unit (starter) (KX-FA84) 3 Important information 4 Quick installation guide guide (PNQW1060Y) (English– PNQW2392Z) (Spanish– PNQW2393Z) 5 Power cord 6 Telephone line cord...
  • Page 8: Accessory Information

    Accessories for this unit can be ordered online, by fax, or by telephone. To ensure that the unit operates properly, we recommend the use of Panasonic toner and drum unit. – Replacement toner cartridge L Model No. (Part No.): KX-FA83 –...
  • Page 9: Overview

    L To send or receive a fax (page 38, 42). {Stop} L To stop an operation or programming session. L To erase a character/number. For assistance, please visit http://www.panasonic.com/help 1. Introduction and Installation 1.4 Overview 1.4.1 Front view 1 Handset...
  • Page 10: Toner Cartridge And Drum Unit

    L We cannot be responsible for any damage to the unit or degradation of print quality which may occur from the use of a non-Panasonic toner cartridge and drum unit. L Do not leave the toner cartridge out of the protective bag for a long time.
  • Page 11 Make sure that the arrows (5) match to install the toner cartridge correctly. For assistance, please visit http://www.panasonic.com/help Lift open the front cover (6), holding OPEN (7). L If the lower glass (8) is dirty, clean it with a soft Install the drum and toner unit (9) by holding the tabs.
  • Page 12: Paper Tray And Paper Tray Cover

    (page 78) when replacing the toner cartridge and/or drum unit. Note: L To ensure that the unit operates properly, we recommend the use of Panasonic toner cartridge (Model No. KX-FA83) and drum unit (Model No. KX-FA84). See page 8 for accessory information.
  • Page 13: Paper Stacker

    (i.e., by a wall, etc.). To remove the paper tray Pull the paper tray forward in the direction of the arrow. For assistance, please visit http://www.panasonic.com/help 1. Introduction and Installation 1.7 Paper stacker Line up the slots (1) in the paper stacker with the pegs (2) on the bottom of the unit, then insert the two tabs of the paper stacker into the slots on the unit (3).
  • Page 14: Document Stacker

    Pull the document stacker (1) forward gently until it clicks into place, then press the center part of the document stacker (2) to open the extender (3). For assistance, please visit http://www.panasonic.com/help 1.9 Handset cord Connect the handset cord (1).
  • Page 15: Recording Paper

    Please be sure to store paper in an air-conditioned room at all times. If you print using moist paper, it may cause paper jam. For assistance, please visit http://www.panasonic.com/help Before inserting a stack of paper, fan the paper to prevent paper jams.
  • Page 16 L If the paper is not inserted correctly, re-adjust the paper, or the paper may jam. Correct For assistance, please visit http://www.panasonic.com/help Adjust the width to the size of the recording paper by sliding the right side of the guides (6).
  • Page 17: Preparation

    Connections and Setup 2 Preparation 2For assistance, please visit http://www.panasonic.com/help 2.1 Connections Caution: L When you operate this product, the power outlet should be near the product and easily accessible. 1 Power cord L Connect to a power outlet (120 V, 60 Hz).
  • Page 18: Dialing Mode

    {1} “PULSE”: For rotary/pulse dial service. {2} “TONE” (default): For tone dial service. {Set} Press {Menu} to exit. For assistance, please visit http://www.panasonic.com/help 2.3 Selecting the operation mode (Fax/Copy/Scan) You can select the desired mode by pressing one of the following buttons.
  • Page 19: Setting The Original

    Make a copy of the document using a copy machine and set the copy. L Available document size, document weight and effective scanning area are as follows: For assistance, please visit http://www.panasonic.com/help Minimum document size 128 mm (5")
  • Page 20: Help Function

    Press {Menu} repeatedly to display “HELP”. Press {<} or {>} repeatedly to display the desired item. i {Set} Press {Menu} to exit. For assistance, please visit http://www.panasonic.com/help Volume 2.6 Adjusting the volume Important: L Before adjusting the volume, set the operation mode to fax mode.
  • Page 21: Date And Time

    L If the time has not previously been set, Caller ID will not adjust the clock. L You can turn this feature OFF (feature #226 on page 51). For assistance, please visit http://www.panasonic.com/help 2.8 Your logo You can program your logo (name, company name, etc.) {Fax} so that it appears on the top of each page sent.
  • Page 22: Your Fax Number

    Press {<} or {>} to move the cursor to the incorrect number, and make the correction. L To erase all numbers, press and hold {Stop}. For assistance, please visit http://www.panasonic.com/help 2.10 Configuring the unit to access the LAN (KX-FLM671 only)
  • Page 23: Installing Multi-Function Station

    For assistance, please visit http://www.panasonic.com/help 2.11 Installing Multi-Function Station 2.11.1 Required computer environment Panasonic Multi-Function Station software enables the unit to carry out the following functions: – Printing on plain paper, transparencies, labels and envelopes – Scanning documents and converting an image into text with Readiris OCR software –...
  • Page 24 For USB connection: 1. [Connect directly with a USB cable.] i [Next] L The [Connect Device] dialog box will appear. For assistance, please visit http://www.panasonic.com/help 2. Connect the unit with the USB cable (1), then click [Next]. * The pictured model is KX-FLM671.
  • Page 25: Starting Multi-Function Station

    Windows 7 users, you must be logged in as an administrator in order to uninstall Multi-Function Station. [Start] i [All Programs] or [Programs] i [Panasonic] i the unit’s name i [Uninstall]. Then follow the on-screen instructions. For assistance, please visit http://www.panasonic.com/help 2.12 Starting Multi-Function...
  • Page 26 Options] i [Programs] i [E-mail] 2. Select the desired MAPI-compliant E-mail software such as [Outlook Express], etc. i [OK] For assistance, please visit http://www.panasonic.com/help For Windows Vista: 1. [Start] i [Control Panel] i [Internet Options] i [Programs] i [Set programs] i...
  • Page 27: Printer

    3 Printer Printer 3.1 Printing from Windows applications You can print a file created in a Windows application. For example, to print from WordPad, proceed as follows: Open the document you want to print. Select [Print...] from the [File] menu. L The [Print] dialog box will appear.
  • Page 28: Printing On Special Media

    3. Printer 3.1.1 Printing on special media You can print not only on plain paper but also on special media (transparencies / labels / envelopes). L Please refer to page 81 for information on recording paper. To print on transparencies Use transparencies designed for laser printing.
  • Page 29 Side seam Peel-off strip construction Twisted Curled Waved Dog-eared Do not attempt to print on any of the following types of envelopes (these may cause damage to the unit): L Envelopes with clasps, snaps or tie strings L Envelopes with transparent windows L Envelopes that use encapsulated types of adhesive that do not require moistening but rely on pressure to seal them...
  • Page 30: Scanner

    4. Scanner 4 Scanner Scanner 4.1 Scanning from the unit (Push Scan) You can easily scan the document by operating the operation panel on the unit. Select following scanning modes depending on the way to use the scanned image. – Viewing using Multi-Function Viewer (Viewer) –...
  • Page 31 Note: L To select the default E-mail software, see page 26. L To stop scanning, see page 62. L You can save the images in JPEG or PDF formats. To send the scanned image via e-mail server (KX- FLM671, LAN connection only) You can send the scanned image as an attachment without using e-mail software.
  • Page 32: Scanning From A Computer (Pull Scan)

    4. Scanner 4.2 Scanning from a computer (Pull Scan) 4.2.1 Using Multi-Function scan application By clicking an application icon, the selected application starts automatically after scanning. Set the original (page 19). Start Multi-Function Station. i [Scan] Click the desired application icon. L When you click [Custom], the pre-programmed application starts.
  • Page 33: Copier

    5 Copier Copy 5.1 Making a copy {Resolution} {Contrast} {Set} {Stop} {Start} If the {Copy} light is OFF, turn it ON by pressing {Copy}. Set the original (page 19). If necessary, change the resolution and contrast according to the type of document. L To select the resolution, see page 33.
  • Page 34: More Copying Features

    5. Copier 5.2 More copying features L Make sure that the {Copy} light is ON. 5.2.1 Zoom copy (enlargement / reduction) Set the original (page 19). {Enhanced Copy} Press {<} or {>} repeatedly to select “ZOOM”. i {Set} Press {Enhanced Copy} repeatedly to select the zoom rate that fits the size of your document and recording paper.
  • Page 35: Copy Reservation

    Proof set feature To make 1 set of collate copy first, set the original and enter necessary settings for collate copy (step 2 to 3 on “5.2.2 Collate copy”, page 34). Press {V} or {^} repeatedly to display “PROOF SET” (step 4 on “5.2.2 Collate copy”, page 34).
  • Page 36: Telephone

    6. Telephone Automatic Dialing 6 Telephone 6.1 Storing items for the one- touch dial feature and navigator directory The unit provides the one-touch dial feature (22 items) and navigator directory (300 items). L Station 1 to 3 can be used alternatively as broadcast keys (page 40).
  • Page 37 L The unit will start dialing automatically. To search for a name by initial Example: “LISA” 1. {Directory} 2. Press {V} or {^} to initiate the navigator directory. 3. Press {5} repeatedly to display any name with the initial “L” (see page 61 for character entry). L To search for symbols, press {*}.
  • Page 38: Fax

    7. Fax 7 Fax Sending Faxes 7.1 Sending a fax manually {Redial} {Monitor} {Set} {Quick Scan} {Contrast} {Resolution} If the {Fax} light is OFF, turn it ON by pressing {Fax}. Set the original (page 19). If necessary, change the resolution and contrast according to the type of document.
  • Page 39: Sending A Fax Using One-Touch Dial Feature And Navigator Directory

    Printing a journal report A journal report provides you with a printed record of the 30 most recent faxes. To print it manually, see page 80. To print it automatically after every 30 new fax transmissions and receptions, make sure feature #402 is activated (page 53).
  • Page 40: Broadcast Transmission

    7. Fax 7.3 Broadcast transmission You can send the same document to multiple parties (up to 20). To use this feature, store the fax numbers into broadcast memory as follows. Broadcast: Store items using one-touch dial or navigator directory (page 36). Manual broadcast: Store items using one-touch dial or navigator directory (page 36).
  • Page 41: Sending A Computer Document As A Fax Message From Your Computer

    7.4 Sending a computer document as a fax message from your computer You can access the fax function from a Windows application using Multi-Function Station. For example, to send a document created from WordPad, proceed as follows. Open the document you want to send. Select [Print...] from the [File] menu.
  • Page 42: Receiving A Fax Manually - Auto Answer Off

    7. Fax 7.6 Receiving a fax manually – Auto answer OFF 7.6.1 Activating TEL mode Press {Auto Answer} repeatedly to display “TEL MODE”. L The {Auto Answer} light turns OFF. {Start} Note: L If you do not answer the call within 10 rings, the unit will temporarily switch to fax reception.
  • Page 43: Using The Unit With An Answering Machine

    7.7 Using the unit with an answering machine 7.7.1 Setting up the unit and an answering machine Connect the answering machine (1). L Answering machine is not supplied. The illustration is just an example. L Remove the protective sheet (2) if attached (page 17).
  • Page 44: Junk Fax Prohibitor (Preventing Fax Reception From Undesired Callers)

    7. Fax 7.8 Junk fax prohibitor (preventing fax reception from undesired callers) If you subscribe to Caller ID service (page 46), this feature prevents fax reception from calls that do not show caller information. Additionally, the unit will not accept faxes originating from numbers that match the ones on a programmable junk fax prohibitor list.
  • Page 45: Receiving A Fax On Your Computer

    7.9 Receiving a fax on your computer You can receive a fax document on your computer. The received fax document is saved as an image file (TIFF- G4 format). To receive a fax document using your computer, make sure the following features are set beforehand. –...
  • Page 46: Caller Id

    8. Caller ID Caller ID 8 Caller ID 8.1 Caller ID service This unit is compatible with the Caller ID service offered by your local telephone company. To use this unit’s Caller ID features, you must subscribe to a Caller ID service. Make sure the following ring count is set to 2 or more rings beforehand.
  • Page 47: Storing Caller Information

    8.3.2 Erasing specific caller information {Caller ID} Press {V} or {^} repeatedly to display the desired item. i {<} i {Set} i {Stop} 8.4 Storing caller information 8.4.1 Storing in the one-touch dial feature and navigator directory {Caller ID} Press {V} or {^} repeatedly to display the desired item.
  • Page 48: Distinctive Ring

    9. Distinctive Ring 9 Distinctive Ring Distinctive Ring 9.1 Distinctive Ring service When a call is made to one of your phone numbers, the telephone company sends a ring pattern to your telephone line to indicate which number the call is intended for.
  • Page 49: Programmable Features

    10 Programmable Features Features Summary 10.1 Programming {Menu} {Menu} Press {#} and the 3-digit code (page 50 to page 59). Press the desired selection to display the desired setting. L This step may be slightly different depending on the feature. {Set} Press {Menu} to exit.
  • Page 50: Basic Features

    10. Programmable Features 10.2 Basic features Feature/Code Setting the quick setup {#}{1}{0}{0} Setting the date and time {#}{1}{0}{1} Setting your logo {#}{1}{0}{2} Setting your fax number {#}{1}{0}{3} Selecting the language {#}{1}{1}{0} Setting the dialing mode {#}{1}{2}{0} Setting flash time {#}{1}{2}{1} Changing the LCD display contrast {#}{1}{4}{5}...
  • Page 51 Feature/Code Changing the password for feature programming via remote operation {#}{1}{5}{5} Setting the ringer pattern {#}{1}{6}{1} Changing the ring count in FAX ONLY mode {#}{2}{1}{0} Setting the Caller ID list to print automatically {#}{2}{1}{6} Setting the time adjustment {#}{2}{2}{6} Setting the recording paper size {#}{3}{8}{0} Holding the previous contrast...
  • Page 52 10. Programmable Features Feature/Code Setting toner save feature {#}{4}{8}{2} Selection {0} “OFF” (default): Deactivates this feature. {1} “ON”: The toner cartridge will last longer. Note: L This feature may lower the print quality by reducing toner consumption.
  • Page 53: Fax Features

    10.3 Fax features Feature/Code Printing a confirmation report {#}{4}{0}{1} Setting the journal report to print automatically {#}{4}{0}{2} Sending documents overseas {#}{4}{1}{1} Sending a fax at a specific time {#}{4}{1}{2} Selection {0} “OFF”: Confirmation reports will not be printed. {1} “ON”: A confirmation report will be printed after every fax transmission. {2} “ERROR”...
  • Page 54 10. Programmable Features Feature/Code Setting the Error Correction Mode (ECM) {#}{4}{1}{3} Setting the connecting tone {#}{4}{1}{6} Activating the Distinctive Ring feature {#}{4}{3}{0} Setting the ring pattern for fax (Distinctive Ring feature) {#}{4}{3}{1} Setting auto reduction feature {#}{4}{3}{2} Changing the fax activation code {#}{4}{3}{4} Setting the memory reception...
  • Page 55 Feature/Code Receiving a fax into the computer {#}{4}{4}{2} Setting the computer for PC fax reception (KX-FLM671, LAN connection only) {#}{4}{4}{3} Resetting fax features to their default settings {#}{4}{5}{9} Selection If you wish to receive a fax into the computer, activate this feature and run [PC FAX] from Multi-Function Station.
  • Page 56: Copy Features

    10. Programmable Features 10.4 Copy features Feature/Code Changing the default copy resolution {#}{4}{6}{1} Holding the previous N in 1 setting {#}{4}{6}{7} Holding the previous zoom setting {#}{4}{6}{8} Holding the previous collate setting {#}{4}{6}{9} 10.5 PC print features Feature/Code Changing the data timeout setting {#}{7}{7}{4} Selection...
  • Page 57: Scan Features

    10.6 Scan features Feature/Code Setting the scan mode for Push Scan {#}{4}{9}{3} Holding the previous scanning parameter for Push Scan {#}{4}{9}{4} SMTP setting for scan to e- mail (via e-mail server) (KX- FLM671, LAN connection only) Registering the scan to e-mail destinations (via e-mail server) (KX-FLM671, LAN connection only)
  • Page 58: Lan Features (Kx-Flm671 Only)

    10. Programmable Features 10.7 LAN features (KX-FLM671 only) Feature/Code LAN setting with a DHCP server {#}{5}{0}{0} Setting the IP address for the LAN connection {#}{5}{0}{1} Setting the Subnet mask for the LAN connection {#}{5}{0}{2} Setting the default gateway for the LAN connection {#}{5}{0}{3} Setting the primary DNS server for the LAN...
  • Page 59 Feature/Code Setting HTTPD for the LAN connection {#}{5}{3}{4} Selection {0} “DISABLED”: Denies access to the web browser. {1} “ENABLED” (default): Allows access to the web browser. 10. Programmable Features...
  • Page 60: Network Features (Kx-Flm671, Lan Connection Only)

    10. Programmable Features 10.8 Network features (KX-FLM671, LAN connection only) These features can be programmed only by through the web browser interface. Feature Setting the location [LAN FEATURE] where you use this unit SMTP setting for scan to [E-MAIL FEATURE] e-mail (via e-mail server) Setting the error notify...
  • Page 61: Useful Information

    11 Useful Information Useful Information 11.1 Character entry The dial keypad is used to enter characters and numbers. – Press {<} or {>} to move the cursor. – Press dial keys to enter characters and numbers. – Press {Stop} to erase the character or number highlighted by the cursor.
  • Page 62: Canceling The Operations

    11. Useful Information 11.2.2 Using Device Monitor You can confirm the setting information and current status of the unit from your computer. Start Multi-Function Station. [Utilities] i [Device Monitor] L The [Device Monitor] window will appear. Confirm the status of the unit. [Status]: Current status of the unit Note: L Additional information (toner and recording paper...
  • Page 63: Help

    JUNK FAX PROH. REJECT MEMORY FULL NO DOCUMENT / FAILED PICKUP OTHER FAX NOT RESPONDING PRESSED THE ‘Stop’ KEY THE COVER WAS OPENED For assistance, please visit http://www.panasonic.com/help Code Cause & Solution 40-42 L A transmission or reception error occurred. Try 46-72 again or check with the other party.
  • Page 64: Display Messages

    “PAPER JAMMED” “PC FAIL OR BUSY” “PLEASE WAIT” For assistance, please visit http://www.panasonic.com/help Cause & Solution L There is something wrong with the unit. Contact our service personnel. L There is something wrong with the drum unit. Replace the drum unit and the toner cartridge.
  • Page 65 “CHANGE SUPPLIES” “TRANSMIT ERROR” “WARMING UP” “WRONG PAPER” For assistance, please visit http://www.panasonic.com/help Cause & Solution L The other party’s fax machine is busy or has run out of recording paper. Try again. L The document is jammed. Remove the jammed document (page 77).
  • Page 66: When A Function Does Not Work

    – Remote Control – PC FAX – Device Monitor For assistance, please visit http://www.panasonic.com/help Cause & Solution L Check the connections (page 17, 24). L The unit is set to the scan mode or copy mode. Press {Fax} to switch modes.
  • Page 67: Printing Problems

    Even after clicking [Cancel], scanning continues. For assistance, please visit http://www.panasonic.com/help Cause & Solution L Some paper has instructions recommending which side to print on. Try turning the recording paper over.
  • Page 68 L The IP address of the unit may have changed. To detect the IP address, proceed as follows. [Start] i [All Programs] or [Programs] i [Panasonic] i the unit’s name i [IP Address Checker] L The IP address for the unit will be detected.
  • Page 69 I cannot receive documents by pressing {*}{#}{9}. For assistance, please visit http://www.panasonic.com/help Cause & Solution L You used a colored paper as a document. Change the contrast (page 33) and make a lighter copy of the document, using “TEXT” resolution (page 33), and try again.
  • Page 70 I cannot receive a fax document on the computer. For assistance, please visit http://www.panasonic.com/help Cause & Solution L The telephone line cord is connected to the [EXT] jack on the unit. Connect to the [LINE] jack (page 17).
  • Page 71 L The IP address of the unit may have changed. To detect the IP address, proceed as follows. [Start] i [All Programs] or [Programs] i [Panasonic] i the unit’s name i [IP Address Checker] L The IP address for the unit will be detected.
  • Page 72: Using An Answering Machine

    The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the above functions properly. Insert the CD-ROM that is supplied with the unit into your CD-ROM drive. For assistance, please visit http://www.panasonic.com/help Cause & Solution L Click [Keep Blocking] and run the Windows Firewall Setting Tool to allow the data transmission for Multi-Function Station (page 72).
  • Page 73 L The [Windows Firewall] dialog box will appear. 3. Click the [Exceptions] tab. 4. Confirm that [Panasonic Trap Monitor Service] and [Panasonic LPD] are displayed and checked on the [Programs and Services] list. To confirm the security settings (For Windows Vista users) 1.
  • Page 74: Paper Jams

    13. Paper Jams 13 Paper Jams Jams 13.1 Recording paper jam The display will show the following: – “PAPER JAMMED” 13.1.1 When the recording paper has jammed near the drum and toner unit Lift open the front cover (1), holding OPEN (2). Caution: The fuser unit (3) gets hot.
  • Page 75 Remove the recording paper (5), then remove the drum and toner unit (6) to allow the jammed paper (7) to pull free from the rear cabinet. Lift both green levers (8) forward until they stop. Remove the jammed paper (9) from the fuser unit by pulling it upwards carefully, then install the drum and toner unit.
  • Page 76 13. Paper Jams Attach the paper tray cover (n), then push back the tension plate (o). 13.1.3 When the recording paper is not fed into the unit properly The display will show the following: – “CHECK PICK UP” Pull the tension plate forward (1), then remove the paper tray cover (2).
  • Page 77: Document Jams - Sending

    13.2 Document jams – sending Caution: L Do not pull out the jammed document forcibly before opening the front cover. Lift open the front cover (1), holding OPEN (2). Caution: The fuser unit (3) gets hot. Do not touch Hold the center part of the front cover (4), and pull open the inner cover (5).
  • Page 78: Cleaning

    14. Cleaning 14 Cleaning Cleaning 14.1 Cleaning the inside of the unit Clean the inside of the unit when: – Documents frequently misfeed. – Black line, a white line or a dirty pattern appear on the original document when sending or copying. Caution: L Be careful when handling the drum and toner unit.
  • Page 79 Remove the drum and toner unit (j) by holding the two tabs. Clean the lower glass (k) with a soft and dry cloth. Re-install the drum and toner unit (l) by holding the tabs. Close the front cover (m) by pushing down on both sides, until locked.
  • Page 80: General Information

    15. General Information Printed Repor ts 15 General Information 15.1 Reference lists and reports You can print out the following lists and reports for your reference. – “SETUP LIST” – “TEL NO. LIST” – “JOURNAL REPORT” – “BROADCAST LIST” – “PRINTER TEST” L If the test print has smudges, or blurred points or lines, clean the inside of the unit (page 78).
  • Page 81 ■ Power supply: 120 V AC, 60 Hz ■ Memory capacity (for operation and storing memory): 32 MB ■ Fax memory capacity: 2 MB in total Approx. 170 pages of memory reception Approx. 150 pages of memory transmission (Based on the ITU-T No. 1 Test Chart in standard resolution.) ■...
  • Page 82 2.4 Adjusting volume Initial Programming 2.5 Dialing mode 2.6 Date and time. 2.7 Your logo.2.8 Your fax number 3. Copy / Copying 3.1 Using the unit as a copy machine. Thank you for purchasing a Panasonic fax machine. Things you should keep a record of Attach your sales receipt here.
  • Page 83: Information Of Copyrights And Licenses (Kx-Flm671 Only)

    Copyrights 15.3 Information of copyrights and licenses (KX-FLM671 only) L This product uses a part of NetBSD kernel. The use of a part of NetBSD kernel is based on the typical BSD style license below. Copyright (c) The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 84 15. General Information Copyright (c) 1982, 1986, 1990, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1982, 1986, 1990, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1982, 1986, 1990, 1993, 1994 The Regents of the University of California. All rights reserved.
  • Page 85 Copyright (c) 1996,1999 by Internet Software Consortium. Copyright (c) 1996-1999 by Internet Software Consortium. Copyright (c) 1997 Jonathan Stone and Jason R. Thorpe. All rights reserved. Copyright (c) 1997 Christos Zoulas. All rights reserved. Copyright (c) 1997 Manuel Bouyer. All rights reserved. Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
  • Page 86 15. General Information L This product contains Net-SNMP software and is using it based on the following license conditions. ---- Part 1: CMU/UCD copyright notice: (BSD like) ----- Copyright 1989, 1991, 1992 by Carnegie Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California Permission to use, copy, modify and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that...
  • Page 87 ---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) ----- Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 88 15. General Information DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 89 However, parts of the thttpd software are provided with the following copyright notices. Copyright 1995 by Jef Poskanzer <jef@acme.com>. Copyright 1998 by Jef Poskanzer <jef@acme.com>. Copyright 1999 by Jef Poskanzer <jef@acme.com>. Copyright 1995,2000 by Jef Poskanzer <jef@acme.com>. Copyright 1999,2000 by Jef Poskanzer <jef@acme.com>. Copyright 1995,1998,2000 by Jef Poskanzer <jef@acme.com>.
  • Page 90: Index

    16. Index 16. Index 16.1 Index # #100 Quick setup: 50 #101 Date and time: 21 #102 Your logo: 21 #103 Your fax number: 22 #110 Language: 50 #120 Dialing mode: 18 #121 Flash time: 50 #145 LCD display contrast: 50 #155 Change password: 51 #161 Ringer pattern: 51 #210 FAX ring count: 51...
  • Page 91 Recording paper: 74 Journal report (Feature #402): 39, 80 Junk fax prohibitor: 44 L Label: 28 LAN features: 58 Language (Feature #110): 50 Logo (Feature #102): 21 M MAC address (Feature #508): 58 Machine name (Feature #507): 58 Memory reception alert (Feature #437): 54 Mode timer (Feature #464): 51 Multi-Function Station software Activating: 25...
  • Page 92 For hearing or speech impaired TTY users, TTY: 1-877-833-8855 PNQX2904ZA CM0610MJ0-CD...

This manual is also suitable for:

Kx-flm671

Table of Contents