Table of Contents
Advertisement
Sending Faxes
Half-tone
setting!
You can change the setting of the half-tone resolution according to the image to be scanned.
You can choose from the following.
PHOTO: Use this setting when the image to be scanned mainly contains photographs.
AUTO:
Use this setting when the image to be scanned contains both photographs and words
(pre-selected setting).
Press (MENU).
1
Display:
Press (#), then (3)(8).
2
Press (START/SET/COPY).
3
Press
or
to select the desired setting.
4
Press (START/SET/COPY).
5
Press (MENU).
6
Error correction mode
ECM means Error Correction Mode.
You can send documents even if there is static interference on the telephone line, provided both the
transmitting and receiving stations are ECM compatible.
ON:
The unit functions with ECM communication.
OFF: The unit does not function with ECM communication (pre-selected setting).
Press (MENU).
1
Display:
Press (#), then (6)(8).
2
Press (START/SET/COPY).
3
Press
or
to select the desired setting.
4
Press (START/SET/COPY).
5
Press (MENU).
6
58
1.SYSTEM SET UP
HALFTONE MODE
MODE=AUTO
SETUP ITEM [
]
setting!
1.SYSTEM SET UP
ECM SELECTION
MODE=OFF
SETUP ITEM [
]
/
MENU
START/SET/COPY
/
MENU
START/SET/COPY
Advertisement
Table of Contents
