Sending A Fax Using The Jog Dial Directory - Panasonic KX-FP250 Operating Instructions Manual

Sending a fax using the JOG DIAL directory

Before using this feature, program the desired names and telephone numbers into the directory (see page 37).
1 Open the document feeder tray.
2
Adjust the width of the document guides to the size
of the document.
3
Insert the document (up to 15 pages) FACE
DOWN until a single beep is heard and the unit
grabs the document.
Display:
4 If necessary, press
select the desired setting (see the bottom of
page 41).
5
Rotate
JOG DIAL
displayed.
Example:
To confirm the number, press
6
Press START/COPY/SET
Example:
The unit will start transmission.
Helpful hints:
To confirm the items stored in the directory, print a
telephone number list (see page 91).
The connecting tone will be heard during dialing to tell
you the status of the other party's machine (see
page 55).
Note:
If the desired name has not been stored, press
and dial the number manually.
To store the name and number, see page 37.
For further details about using the JOG DIAL, see
page 39.
If your fax does not transmit, press
then repeat steps 5 and 6. Verify that the number
dialed is answered by the other party's fax machine.
STANDARD
repeatedly to
RESOLUTION
until the desired name is
Alice
NAME/TEL NO.
.
FAX=<Alice>
CONNECTING.....
STOP
SP-PHONE and
Sending Faxes
Document
feeder tray
SP-PHONE
.
NAME/TEL NO.
Document guides
FACE DOWN
STOP JOG DIAL
START/COPY/SET
RESOLUTION
43