Operating Instructions; Setting Your Logo - Panasonic KX-FP365CX Service Manual

9 Operating Instructions

9.1.

Setting Your Logo

You can program your logo (name, company name, etc.) so
that it appears on the top of each page sent.
1. [MENU] → [#][0][2] → [SET]
2. Enter your logo, up to 30 characters. See the following
character table for details. → [SET]
3. Press [MENU] to exit.
To select characters with the dial keypad
Note:
• To enter a character that is located on the same dial key as
the previously entered character, you must first press [
move the cursor to the next space.
To enter your logo
Example: "BILL"
1. Press [2] 2 times.
2. Press [4] 3 times.
3. Press [5] 3 times.
4. Press [ ] to move the cursor to the next space and
press [5] 3 times.
To switch between uppercase or lowercase letters
Pressing the [ ] button will change the letter input to upper-
case or lowercase alternately.
1. Press [2] 2 times.
2. Press [4] 3 times.
3. Press [ ] 3 times.
4. Press [5] 3 times.
To correct a mistake
Press [ ] or [ ] to move the cursor to the incorrect char-
acter, and make the correction.
• To erase all of the characters, press and hold [STOP].
61
KX-FP365CX / KX-FM388CX
] to