Operation Instructions; Setting Your Logo - Panasonic KX-FP207FX-S Service Manual

KX-FP207FX-S/FP218FX-S
Document requirements
Document weight
• When faxing a single sheet:
2 2
45 g/m to 90 g/m
• When faxing a multiple sheet:
2 2
60 g/m to 80 g/m
Note:
• Remove chips, staples or other fasteners.
• Do not send the following types of documents. (Make a copy
of the document and send the copy.)
— Chemically treated paper such as carbon or carbonless
duplicating paper
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen
through the other side, such as newsprint
• Check that ink, paste or correction fluid has dried com-
pletely.
• To send a document with a width of less than 210 mm, we
recommend using a copy machine to copy the original docu-
ment onto A4 or letter-sized paper, then sending the copied
document.

9 Operation Instructions

9.1.

Setting Your Logo

You can program your logo (name, company name, etc.) so
that it appears on the top of each page sent.
1. [MENU] → [#][0][2] → [SET]
2. Enter your logo, up to 30 characters. See the following
character table for details. → [SET]
3. Press [MENU] to exit.
To select characters with the dial keypad
Note:
• To enter a character that is located on the same dial key as
the previously entered character, you must first press [
move the cursor to the next space.
56
] to