Cpu Fan Installation With P4 Fan Base - Acorp 4865PE Manual

Chapter 1

1.5.2 CPU Fan Installation with P4 Fan Base

1. P4 CPU Fan is typically designed with 4 latches and mounted
with a thick heatsink. Please do not use other type of CPU fan
which cannot match the P4 Fan base on board.
2. Install the P4 CPU fan into the Fan base in such a way that
the 4 latches of the CPU Fan match with the 4 Supporters of
the CPU Fan Base.
3. Press down the latches to lock CPU Fan to the Fan Base.
4. Then connect the Fan Power Cable to one of the Fan con-
nectors on board.
5. Make sure that the Fan Power Cable is correctly connected
to Fan Connector.
Fan Connector for Fan Power Cable
Fan Base
mPGA478B
RTL
ALC650
BIOS
4 Latch-supporters
1-12
Motherboard 4865PE
Battery
Intel
82801