Acorp 4865PE Manual page 49

Chapter 2
RxD, TxD Active
If UART Mode Select is at "IRDA or ASKIR, this item allows
you to select the RxD, TxD Active mode.
The Choices: Hi, Lo; Lo, Hi; Lo, Lo; Hi, Hi.
IR Transaction Delay
If UART Mode Select is at IRDA or ASKIR, this item allows you
to enable/disable the IR Transaction Delay function.
The Choices: Enabled; Disabled
UR2 Duplex Mode
This item allows you to select the UR2 Duplex mode.
The Choices: Full; Half
Use IR Pins
This item allows you to select the IR pins.
The Choices: 3IR-R2Tx2; RxD2, TxD2;
Onboard Parallel Port
This item allows you to select the onboard parallel port and IRQ.
The Choices: 378/IRQ7; 278/IRQ5; 3BC/IRQ7; Disabled
Parallel Port Mode
The choices are for Parallel Port Mode select:
The choices: SPP; EPP;ECP; ECP+EPP
EPP Mode Select
This item is a submenu of "Parallel Port Mode".
The choices: EPP1.7; EPP1.9
ECP Mode Use DMA
This item is a submenu of "Parallel Port Mode" for selecting the
ECP Mode Use DMA..
The choices: 3; 1
PWRON After PWR-Fail
Set the Power-on mode when power resumes after power fails.:
The choices: Off (default); On; Former-Sts (former status)
4865PE BIOS Setup
2-49