Cpu Fan Installation With P4 Fan Base - Acorp 4S651M Manual

Chapter 1

1.5.2 CPU Fan Installation with P4 Fan Base

1. P4 CPU Fan is typically designed with 4 latches and mounted
with a thick heatsink. Please do not use other type of CPU fan
which cannot match the P4 Fan base on board.
2. Install the P4 CPU fan into the Fan base in such a way that
the 4 latches of the CPU Fan match with the 4 Supporters of
the CPU Fan Base.
3. Press down the latches to lock CPU Fan to the Fan Base.
4. Then connect the Fan Power Cable to one of the Fan con-
nectors on board.
5. Make sure that the Fan Power Cable is correctly connected
to Fan Connector.
Fan Connector for
Fan Power Cable
Motherboard 4S651M/4S651MN
4 Latch-supporters
Socket 478
SiS
650GX
RTL8101L
AGP8X/4X
PCI1
1-11
Fan Base
SiS
962L
PCI2
Battery
PCI3